Filters
Topic: Lighting controls 
(remove) Content type: Resource Guide (remove) Service line: Technology Assessment (remove) Results
Lighting Controls
February 1, 2009
Controls that vary the time of operation and the intensity of electric lighting can cut energy use, reduce peak demand, improve occupant comfort, and increase productivity.
Content type: Resource Guide | Document ID: TAS-RG-16 | Author: Ira Krepchin
Hotel Room Automation
December 30, 2008
Lights and HVAC are the two biggest users of energy in limited-service motels. Available studies suggest a 25 to 44 percent energy-savings potential per room for automation products and can be used in virtually any hotel or motel to some degree.
Content type: Resource Guide | Document ID: TAS-RG-11 | Author: Peter Criscione and Ira Goldschmidt
Daylighting Controls
January 8, 2008
Daylighting controls can avoid the common daylighting hazards of underdimming, overdimming and rapid cycling. This Resource Guide covers design and technology fundamentals and alternatives, economics, maintenance, efficiency, market information, and utility program models.
Content type: Resource Guide | Document ID: TAS-RG-3 | Author: Christie Rewey and Ira Krepchin
Occupancy Sensors
October 15, 2007
Occupancy sensors detect the presence or absence of people and turn lights on and off accordingly. Used properly, occupancy sensors can be a cost-effective tool for reducing the operating time and/or light output of lighting systems, cutting energy consumption and peak demand.
Content type: Resource Guide | Document ID: TAS-RG-2 | Author: Kristin Kamm
Ballasts for Full-Size Fluorescent Lamps
August 3, 2007
Ballasts convert line current into the proper voltage, amperage, and waveform to operate fluorescent lamps. The choice of ballast influences how efficiently a lighting system operates and how much light it provides, but users face an often bewildering array of options.
Content type: Resource Guide | Document ID: TAS-RG-1 | Author: Ira Krepchin
